Cone motor wiring diagram_Wolong Nanyang Explosion-proof Motor, China Motor Manufacturer

Hot News

Contact

Contact Person：Mr. Du
Phone：+8613609288011
E-mail：tina.gatn@wolongcne.com
ADD.：No.1801 Dushan Avenue, Nayang City Henan Province, China

Cone motor wiring diagram

source：未知 time：2025-01-24 11:06nbsp; click：

1. Basic knowledge of conical motor internal wiring

1. Basic structure of conical motor

Conical motor is a rotating motor, and its basic structure is divided into rotor, stator, end cover, bearing, fan and other components. Among them, the rotor is the moving part of the motor, which is composed of a coil wound with copper wire and an iron core. The stator is the static part of the motor, which is composed of a coil wound with copper wire and an iron core. The end cover is the supporting structure of the motor, which is used to fix the bearing and shaft. The bearing supports the rotor and shaft of the motor so that it can rotate. The fan plays a role in heat dissipation to ensure the normal operation of the motor.

2. The role of conical motor internal wiring

Conical motor internal wiring is the process of connecting the coils of the stator and rotor to the external power supply. At the same time, correct internal wiring can also improve the efficiency and life of the motor.

2. Steps for conical motor internal wiring

1. Preparation

First, you need to prepare the required tools and materials, including wires, insulating leather sleeves, wire crimping pliers, insulating tape, cable protection tubes, etc. Then, you need to select the appropriate wire specifications according to the rated voltage and rated current of the motor.

2. Inspection before wiring

Before wiring, it is necessary to check whether the electrical parameters of the motor meet the requirements. Including parameters such as voltage, current, and power. At the same time, it is also necessary to check whether the insulation performance of the motor is good. If the insulation resistance of the motor is found to be lower than the standard value, it should be replaced in time.

3. Wiring steps

The wiring steps are as follows:

(1) Remove the end cover of the motor and take out the bearing and shaft.

(2) Wind the stator coil of the motor, and pay attention to keeping the coil neat and flat.

(3) Fix the stator coil on the stator core with insulating tape.

(4) Wind the rotor coil of the motor, and pay attention to keeping the coil neat and flat.

(5) Fix the rotor coil on the rotor core with insulating tape.

(6) Lead out the wires of the stator coil and rotor coil respectively.

(7) Install the end cover of the motor back, and reinstall the bearing and shaft.

(8) Lead out the wires of the motor.

(9) Connect the wires to the external power supply and the wiring is completed.

3. Precautions for internal wiring of cone motors

1. Disconnect the power supply before wiring to ensure safety.

2. Label the wires when wiring for future maintenance.

3. Pay attention to the length and specifications of the wires when wiring. Wires that are too long or too short will affect the normal operation of the motor.

4. Ensure good insulation performance of the wires when wiring to avoid electric shock accidents.

5. Electrical testing is required after wiring to ensure that the electrical parameters of the motor meet the requirements.
Flameproof Three Phase Induction Motors, Flange And Foot Mounted Motor, Flange Electric Motor

上一篇：Locked Rotor Torque and Starting Torque | 下一篇：没有了

Recommend MORE+

NEWS MORE+

Cone motor wiring diagram 2025-01-24
Locked Rotor Torque and Starting Torque 2025-01-22
The difference between pt100 and PTC 2025-01-20
Principle and method of speed regulation of fan mot 2025-01-17
Explosion-proof grade: Ex db ec pzc IIC T3 Gc 2025-01-15
Motor magnetic center line 2025-01-13
Working principle and method of motor braking 2025-01-10
What is the function of motor grounding? 2025-01-09
Precautions when hoisting the motor 2025-01-08
Cold insulation resistance of the motor 2025-01-07