Hot News
Contact
- Contact Person：Mr. Du
- Phone：+8613609288011
- E-mail：tina.gatn@wolongcne.com
- ADD.：No.1801 Dushan Avenue, Nayang City Henan Province, China
- 2024-07-17Select bearings by static load capacity
Bearing selection is a must for m otor designers . Proper bearing selection can effectively guarantee motor performance. Otherwise, the motor can only grow through continuous failures. Well-known bearing manufacturers will work hard on the ...
- 2024-07-16What is the reason for the motor vibration?
In the manufacturing process of the motor , the factors that may cause the motor vibration will be reduced and eliminated through measures such as rotor dynamic balancing, winding insulation treatment, and component matching tolerance adjus ...
- 2024-07-15Differential protection used on large high-voltage motors?
Compared with small and medium-sized motors, high-voltage motors are expensive and are used in critical and special applications. Whether it is the disposal of the motor body after a failure or other problems derived from the failure, it may ...
- 2024-07-12The influence of paint on motor windings on the motor
For any motor product, the dipping and baking process is a very critical control link. For this process, it is mainly controlled by equipment, technology and process management. The purpose of dipping and baking the motor winding is to fill ...
- 2024-07-11Why are electromagnetic flat wire motors so popular?
The winding scheme is the dominant factor of motor products, which directly affects or determines the performance indicators of motor products in many aspects, such as cost, efficiency, temperature rise and insulation level. ...
- 2024-07-10Why are cast aluminum rotor motors so widely accepted?
According to the material characteristics of the motor rotor slots, there are wound rotors, cast aluminum rotors and permanent magnet rotors. In comparison, cast aluminum rotors are the most widely used, of course, due to some cost and proce ...
- 2024-07-09What to consider about the rotor when selecting a VFD?
For working conditions with continuous speed change requirements, the inverter will be used to drive the motor, that is, the motor speed can be adjusted steplessly by changing the frequency of the motor power supply. ...
- 2024-07-08Consequences of misalignment of stator and rotor cores
The users of the motor are more concerned about the application effect of the motor, while the manufacturers and repairers of the motor are more concerned about the whole process of motor production and repair. Only by handling every link we ...
- 2024-07-05Why should the core be segmented?
Recently, we have released a batch of motor failure and motor component feature pictures, which have attracted the attention of many netizens. Everyone has expressed their views based on their knowledge, work experience and personal experien ...
- 2024-07-04The formation and harm of axial force during motor operation
When the stator winding of a three-phase AC synchronous motor or an asynchronous motor (hereinafter referred to as a three-phase AC motor) is connected to the power supply, a rotating magnetic field is generated. Therefore, for an asynchrono ...
