Hot News
Contact
- Contact Person：Mr. Du
- Phone：+8613609288011
- E-mail：tina.gatn@wolongcne.com
- ADD.：No.1801 Dushan Avenue, Nayang City Henan Province, China
- 2024-06-07Why does the insulation of high-voltage motor windings age?
Compared with low-voltage motors, the insulation structure of high-voltage motor windings is more complicated. Whether it is the selection of electromagnetic wire or the wrapping of insulation materials, they are very different from low-vol ...
- 2024-06-06Vertical Motor Noise Fault Analysis
Ms. Cans friend said that their company produced a YE3-355-4 export vertical motor, but it was not allowed to leave the factory due to excessive vibration and noise, which met the assessment requirements. After consultation and discussion b ...
- 2024-06-05How to configure motor bearings?
The rotor part of the motor product usually needs to be supported by two sets of bearings, and the rotor is radially and axially positioned relative to the stator. According to different usage requirements, such as load, required rotation a ...
- 2024-06-04Advantages of variable frequency motors
Variable frequency speed regulation usually refers to such an electromechanical system: variable frequency speed regulation i nduction motor , frequency converter, programmable controller and other intelligent devices, terminal actuators an ...
- 2024-06-03Advantages of cast aluminum rotor slots in motors
For most electric motors, electromagnetic wires are embedded in the stator core slots to provide a rotating magnetic field for the motor to operate. There are two types of rotor core parts: one is a cast aluminum or copper rotor achieved by ...
- 2024-05-31Use and precautions of moisture-proof heating tape for motor
Heating belt is suitable for heating and heat preservation of tanks, pipes, tanks and other containers of various industrial equipment. It is mainly composed of electric heating materials and insulating materials. The electric heating materi ...
- 2024-05-30What methods can be taken to improve motor temperature rise?
Temperature rise is a very important performance indicator of motor products , which has different degrees of impact on motor efficiency and use environment. Therefore, both motor manufacturers and motor users hope to have an acceptable tem ...
- 2024-05-29What are the advantages of water-cooled motors?
At a production site of a steel rolling mill, a maintenance worker asked about the advantages of water-cooled high-voltage motors for its forging equipment. In this issue, we will have a discussion with you on this issue. In laymans terms, ...
- 2024-05-29How to realize axial positioning control of motor products?
During the operation of the motor, the most ideal state is for the stator and rotor cores to be axially aligned to ensure that the effective iron length is maximized; however, in actual situations, components will expand due to heat generat ...
- 2024-05-27When the magnetic centerline of the motor is misaligned
The magnetic field of the motor is mainly reflected in the gap between the stator and the rotor, which is what we call the air gap magnetic field. When the motor rotor moves to a certain position along the axial direction, the magnetic lines ...
