Hot News
Contact
- Contact Person：Mr. Du
- Phone：+8613609288011
- E-mail：tina.gatn@wolongcne.com
- ADD.：No.1801 Dushan Avenue, Nayang City Henan Province, China
Tunnel construction increased
source：未知 time：2024-06-24 13:40nbsp; click：
With the continuous advancement of global urbanization, the population concentration is increasing, and the demand for transportation between cities is becoming increasingly strong. As an important channel connecting cities, tunnel engineering plays a key role in transportation. In recent years, my country's tunnel and underground engineering construction has also developed rapidly, and the number of tunnel construction has increased rapidly.
The attached vibrator consisting of a high-frequency vibrator and a frequency conversion cabinet is the most commonly used solution in the tunnel industry. The system has the characteristics of large exciting force, wide radiation range, small amplitude, high working efficiency and long life. It can greatly improve the density and surface smoothness of concrete, reduce the possibility of deformation of steel formwork, and extend its service life.
However, since tunnel construction will be affected by the climatic environment, such as plateau, severe cold, freezing, wind erosion, etc., a single high-frequency vibration system cannot perfectly cope with this series of problems. Therefore, in addition to the attached vibration solution, an inserted vibrating rod is also required for auxiliary vibration.
The attached vibrator consisting of a high-frequency vibrator and a frequency conversion cabinet is the most commonly used solution in the tunnel industry. The system has the characteristics of large exciting force, wide radiation range, small amplitude, high working efficiency and long life. It can greatly improve the density and surface smoothness of concrete, reduce the possibility of deformation of steel formwork, and extend its service life.
However, since tunnel construction will be affected by the climatic environment, such as plateau, severe cold, freezing, wind erosion, etc., a single high-frequency vibration system cannot perfectly cope with this series of problems. Therefore, in addition to the attached vibration solution, an inserted vibrating rod is also required for auxiliary vibration.
Issues that need to be noted during construction:
1. Check and tighten all vibrator fixing nuts before each pouring.
2. Check the formwork for reinforcement to avoid deviation.
3. Check whether the control system is normal.
4. After the vibrator is started, it is not allowed to start other vibrators midway.
The technology of tunnel engineering is developing rapidly, and there are continuous breakthroughs in the application of various construction methods. OLE follows the development direction of tunnel technology, takes intelligence, greenness, safety and efficiency as innovation goals, collaborates with global tunnel technology for innovation, and continues to make progress. We are committed to providing customers with a full set of system solutions in the field of vibration, anytime, anywhere, as you need.
The technology of tunnel engineering is developing rapidly, and there are continuous breakthroughs in the application of various construction methods. OLE follows the development direction of tunnel technology, takes intelligence, greenness, safety and efficiency as innovation goals, collaborates with global tunnel technology for innovation, and continues to make progress. We are committed to providing customers with a full set of system solutions in the field of vibration, anytime, anywhere, as you need.
Recommend MORE+
-
YB3 High-pressure explosion-proof motor
-
YZYKK High Voltage Positive Pressure Asynchronous M
-
OLI Explosion-Proof Vibration Motors
-
YBC Coal Mine Flame-proof Motor
-
YB3 high voltage explosion-proof motor
-
YFB3 Low-voltage dust explosion-proof motor
-
YBRB Flame-proof AC Motor
-
YQ-H series three-phase asynchronous marine motor
NEWS MORE+
- Why are three-phase asynchronous motors so commonly 2025-02-14
- Why are ordinary motors not suitable for direct use 2025-02-12
- EMA WPII the motor design standards 2025-02-11
- The difference between IC06 and IC511 cooling metho 2025-02-06
- Cone motor wiring diagram 2025-01-24
- Locked Rotor Torque and Starting Torque 2025-01-22
- The difference between pt100 and PTC 2025-01-20
- Principle and method of speed regulation of fan mot 2025-01-17
- Explosion-proof grade: Ex db ec pzc IIC T3 Gc 2025-01-15
- Motor magnetic center line 2025-01-13
