Hot News
Contact
- Contact Person：Mr. Du
- Phone：+8613609288011
- E-mail：tina.gatn@wolongcne.com
- ADD.：No.1801 Dushan Avenue, Nayang City Henan Province, China
How to improve the dipping effect of motor winding？
source：未知 time：2020-12-09 14:21nbsp; click：
For any type of motor winding, insulation is a critical element. And the curing of motor winding’s dipping is one important aspect for motor insulation.
The factors affecting the curing effect of the winding dipping include the insulation performance of the dipping paint, the viscosity and the permeability of the paint, the paint amount of the winding, the different positions of the winding during the drying process, the uniformity of the paint accumulation, and the winding’s integrity after drying. The curing effect of the winding dipping not only has a great influence on the insulation performance of the motor, but also has a great correlation on the temperature rise and mechanical performance of the motor.
In order to achieve a better insulation effect of winding, many motor manufacturers take the winding and drying process as the special and key quality control points with necessary equipment, such as VPI-vacuum pressure impregnating- to ensure that the winding are heated and painted evenly with rotating oven.
Why do manufacturers choose VIP equipment ?
* better insulation performance
* lower temperature rise
* better efficiency
* better mechanical strength
* control the loose phenomenon of the operation process
* prevent short circuits
* improve moisture resistance
* extend service life
VPI is a good method of dipping paint. The motor manufacturers that are committed to regulating production have already adopted this technology though the cost is high.
The factors affecting the curing effect of the winding dipping include the insulation performance of the dipping paint, the viscosity and the permeability of the paint, the paint amount of the winding, the different positions of the winding during the drying process, the uniformity of the paint accumulation, and the winding’s integrity after drying. The curing effect of the winding dipping not only has a great influence on the insulation performance of the motor, but also has a great correlation on the temperature rise and mechanical performance of the motor.
In order to achieve a better insulation effect of winding, many motor manufacturers take the winding and drying process as the special and key quality control points with necessary equipment, such as VPI-vacuum pressure impregnating- to ensure that the winding are heated and painted evenly with rotating oven.
Why do manufacturers choose VIP equipment ?
* better insulation performance
* lower temperature rise
* better efficiency
* better mechanical strength
* control the loose phenomenon of the operation process
* prevent short circuits
* improve moisture resistance
* extend service life
VPI is a good method of dipping paint. The motor manufacturers that are committed to regulating production have already adopted this technology though the cost is high.
Recommend MORE+
-
YB3 High-pressure explosion-proof motor
-
YZYKK High Voltage Positive Pressure Asynchronous M
-
OLI Explosion-Proof Vibration Motors
-
YBC Coal Mine Flame-proof Motor
-
YB3 high voltage explosion-proof motor
-
YFB3 Low-voltage dust explosion-proof motor
-
YBRB Flame-proof AC Motor
-
YQ-H series three-phase asynchronous marine motor
NEWS MORE+
- Why are three-phase asynchronous motors so commonly 2025-02-14
- Why are ordinary motors not suitable for direct use 2025-02-12
- EMA WPII the motor design standards 2025-02-11
- The difference between IC06 and IC511 cooling metho 2025-02-06
- Cone motor wiring diagram 2025-01-24
- Locked Rotor Torque and Starting Torque 2025-01-22
- The difference between pt100 and PTC 2025-01-20
- Principle and method of speed regulation of fan mot 2025-01-17
- Explosion-proof grade: Ex db ec pzc IIC T3 Gc 2025-01-15
- Motor magnetic center line 2025-01-13
